Suzhou Haisiyuan Instrument equipment co., LTD,You are welcome!

Laboratory overall solution service platform

24-hour hotline

180-1314-3418
0512-67158275

Product catalog
Automatic high pressure steam sterilizer - inner diameter Φ370 (54L/78L)
0512-67158275hsy_001@hsy515.cn
  1. Share:

characteristic:

 

-The sterilization temperature can be set up to 138 ℃


-Using PT1000 sensor, the temperature control is more accurate, and the display accuracy is 0.1 degrees


-Electronic water level sensor and temperature water level sensor have two water level monitoring functions


-With level 5 password setting function, it can be used for data traceability of pharmaceutical factories, meets the requirements of GMP and FDA certification, and can print FO value


-It can be equipped with pressure gauge with negative pressure up to 0.5, overcurrent and short circuit protection system


-Standard configuration: optimized dry burning prevention function, overtemperature protection system, overvoltage protection, safety valve


-Cover opening and stop heating function


-Real time data saving function, memory storage of 60 programs, programmable sterilization programs in various modes


-Voice prompt function


-After sterilization, the exhaust valve can exhaust steam according to the set six-stage exhaust speed, and the exhaust speed can be manually adjusted at any time during the exhaust process


-FreeRTOS embedded operating system


-Standard USB flash disk real-time data recording


-With automatic detection, check and compare the functional relationship between temperature and pressure to ensure that the real saturated steam state is achieved


-Automatically detect the discharge of cold air to ensure the function of steam internal discharge and protect the pollution-free environment


-The boiling point temperature can be adjusted according to the altitude


-The exhaust temperature can be adjusted within the boiling point temperature plus 0-25 degrees


-Dual temperature sensors can detect air temperature and water temperature


-One article sensor hole on the pot cover and two verification holes are reserved on the tank body to facilitate verification and connection


-Self sensing pressure interlocking device, cover closing inspection system, leakage protection device


 








easy operation:




众多(duō)优点灭菌更安全更彻底

 

security

Pressure interlocking mechanism


-Start up, sterilization start, micro position switch in real time during sterilization


Monitor the position of the interlocking mechanism. In case of abnormal alarm, stop the machine to ensure safety.


-As long as there is pressure in the chamber (with pressure sensor), the pot cover cannot be opened.


-The pot cover cannot be opened when the power is suddenly cut off during sterilization.


-After sterilization, the temperature in the cavity is lower than 90 ℃, and the cover opening temperature can be set arbitrarily in the circle.


 

-Double overpressure protection


-Double overtemperature protection


-Prevent dry burning


-Pressure sensor


-Leakage protector


-Automatic intelligent control system



technical parameter

-The test technical data is only applicable to the test results at the ambient temperature of 25 ℃ under the no-load condition of the equipment!

-The product appearance and parameters are changed without notice. Please understand that the product appearance deviates due to photography and printing!



Options and accessories

-Printer (print content: pressure holding in the pot during sterilization, sterilization temperature and time)

-Item sensor

-3Q certification

-Full internal drainage


Next:Automatic high-pressure steam sterilizer - tank diameter Φ450 (65L/85L/100L/120L)
Previous:No Content!