Safety:

The system has the function of self checking in safety state, and the pot cover cannot be opened in the power off state

It has the self induction interlock device of safe opening temperature and pressure. When the temperature in sterilization chamber must be lower than 60 ℃, and the pressure in the chamber is zero, the lid of the pot can be opened, otherwise the locking mechanism will be locked automatically to prevent improper operation, accidental scalding and burning of steam

Temperature protection: high precision temperature sensor and over temperature protection control system, which can cut off heating and alarm in case of abnormal temperature. Besides, mechanical over temperature protector has double over temperature protection function

Pressure protection: high precision pressure sensor and over-pressure protection system can ensure the valve to be opened for pressure relief and alarm in case of abnormal pressure. In addition, mechanical pressure safety valve has double overpressure protection function

Water shortage and dry burn protection: when there is no water for sterilization during sterilization, the system will consider the heater to work abnormally and cut off the heater automatically

Intelligence:

Automatic inspection system: it can check the quality of sensor, whether the circuit is short circuit or open circuit, whether the control board chip is damaged, and display the fault code in case of any error or failure to prompt the user

Air mist pollution: there are 2 gas collecting cylinders. The sterilization steam can ensure zero discharge of steam through two condensations, so as to avoid the sterilization steam directly discharged into the laboratory and pollute the environment

Intelligent microcomputer control system not only realizes the automatic control of sterilization process, but also ensures the sterilization process is more safe and repeatable

Four preset sterilization modes are for solid sample, liquid sample and agar respectively

A memory storage system: users can set their own sterilization parameters

Saturated steam detection: the system automatically detects the cold air emission, ensures the sterilization environment of pure steam and ensures good sterilization effect

Automatic exhaust control: it has the mode of full row, micro row and non exhaust, which can meet the sterilization requirements of various samples

Time start function: the time program (1-99 hours) can be set in advance, so that the sterilizer can automatically start sterilization according to the set time

Interface control:

The latest sterilization procedure will be displayed automatically after startup, and the work can be started by pressing start

A. It has status flow chart, which knows the current sterilization mode, sterilization status, completed sterilization procedure and the procedure to be processed

It has countdown function, and the remaining time is clear at a glance

Confirm key can query the specific parameters of the current program

optimal design

Through a large number of experiments, we have achieved a balance in product volume, use efficiency and storage time.

Higher performance

High vacuum coverage and structure design can achieve long storage time, low consumption of liquid nitrogen and greatly reduce the volatilization rate of liquid nitrogen.

Temperature monitoring

The monitoring system based on intelligent control system and high precision clamp resistance temperature sensor can display the temperature in the tank in real time with the accuracy of 0 ± zero point one ° C. The user can set the alarm mode and alarm value according to the demand.

Liquid level monitoring

The monitoring system based on intelligent control system and capacitive liquid level sensor can display the liquid level in real time to ensure the effective and reliable liquid nitrogen capacity in the tank and the safety of sample storage.

Larger volume

Compared with similar products, it has the advantages of small floor area and more samples, which can save space and reduce the storage cost of unit sample.

Easier to use

The structure design and intelligent liquid nitrogen management system can realize WiFi / 4G networking, local sound and light alarm (optional), telephone, SMS, email and wechat remote alarm. The operation data can be stored and traced permanently, downloaded and archived on demand. Independent temperature and capacitive liquid level monitoring system makes sample storage safe and reliable.

intelligent system

The main parameters such as liquid level and temperature of liquid nitrogen tank are visualized; At the same time, it can realize data interconnection with Kirin cloud management platform to realize remote monitoring and remote alarm

What you see is what you get

The water quality resistivity and total organic carbon data can be displayed in real time in the palm, supplemented by five kinds of adjustable water intake speed and convenient quantitative water intake function, which will meet the requirements of customers.

Fingertip touch intelligent system

Seven inch large touch screen provides users with user-friendly and interactive display interface, including quick display of system status and maintenance information of consumables life; Multi language display, including Chinese, English, Japanese and Korean; Different colors are used to identify different water quality, and eye-catching color indication mode ensures that customers can obtain different water quality according to different applications.

Each step goes through purification

The unique pre filtration device with optional leakage sensor provides additional system monitoring and protection for customers; Integrated monitoring of inlet water pressure and flow rate, combined with flexible selection of various purification columns, can provide customized solutions to meet different water demand of customers on the premise of prolonging service life of consumables and reducing cost.

Ergonomic design

7 inch color touch screen

Detachable / frameless / electric damper

Full automatic / three stage / practical calibration

Layout of rear mounted sensors

Ultra low chassis design

Dynamic graphic display

Electronic level guide

Multiple communication interfaces

Infrared induction control (optional)

Automatic removal of electricity (optional)

Environmental monitoring compensation (optional)

‘

Instrument type: desktop all-in-one machine, with display operation screen, no need to connect computer, saving space. It can be upgraded to fluorescence counter

The counting processing time is less than 15 seconds

Automatic focusing, automatic exposure and manual adjustment

Concentration range of cell samples: 1 × 104-1 × 107cells/ml

The diameter range of cells: 4-60 μ m

The accuracy range of cell detection: CV < 5% < p = >

Sample volume: 10 μ L

Imaging system: 5 million pixels, 2.5 times optical magnification

Image display: the microscopic image of cells can be seen, and the living and dead cells can be marked with different colors, and the image can be manually enlarged for observation

Program: built in common cell pre design number program, which can be called with one key, and users can adjust or add new ones by themselves; Bright field, trypan blue and fluorescent modes are available

Counting analysis: it can provide the total concentration of cells, the concentration of living cells and dead cells, and the proportion of them in the total number of cells; It can be used for gating and counting cell subpopulations of different sizes

Fluorescence analysis: two kinds of fluorescence analysis can be carried out at the same time with the corresponding wavelength fluorescence column

Data storage and export: no less than 1000 user counting records can be stored, and counting results, analysis reports and images can be exported through USB port

Specification of counting board: disposable counting board, each board has double holes, free of washing, reduce the risk of pollution

Dimension: 212 mm (W) * 264 mm (H) * 165 mm (d); Weight: about 3.2 kg (excluding fluorescent column)

       The JS-3000 fully automatic digital gel imaging analysis system is suitable for photography of DNA/RNA electrophoresis gel, protein electrophoresis gel, dot blot and other images at low illumination. It uses high sensitivity digital CCD and no loss of stripe. Control EB pollution, effectively protect the health of experimental operators. It is helpful for researchers to get electrophoresis pictures and analysis results safely, correctly and quickly.